![]() ![]() I've been watching some YouTube videos in the last couple months. I have to play with it and learn more about what I'm doing so I know I'm doing it correctly. ![]() I had to wait another 3-4 months for that so now I can at least do some rudimentary testing, finally. I have been waiting on the NanoVNA V2 to come out since last year, when it finally came out earlier this year I heard that they were working on a better one that goes up to 4 GHz and has greater dynamic range, not to mention a 4" screen. So, is this being measured correctly? The loop seems to work so maybe all of this isn't very critical at these low frequencies? I'm also guessing this is how all loops like this are? I wasn't expecting the range of frequencies the loop can receive to be perfect or anything nor to have an SWR below 2.0 for everything but 11:1? and an impedance well below 50 and well above 50? When the Loop's best SWR measurement of 3.54:1 at 22 MHz and an impedance of 14 ohms and its worst SWR of 11:1 at 18.47 MHz and impedance of 710 ohms, being fed through a 50 ohm cable makes me wonder how it can receive anything at all. Anything above 2.0 I would think the antenna was stepping into "bad matching" territory, maybe I'm being overly conservative, I'm not sure. ![]() I am not an expert with all of this but I consider an SWR of 2.0 or less to be "good" and 1.5 or less to be "very good". I have been using my loop for about a year now and in my limited "year" experience with receiving SW with the loop I thought it had been doing well. The SWR and Impedance was bad to terrible on all frequencies and some parts it was horrendous (see the attached screenshot). The surprise came when I hooked up my Wellbrook loop antenna and did a sweep from 0.1 MHz to 30 MHz. As I expected, my Diamond discone and Siro UHF discone do better on some frequency ranges and a little worse on others. I have never used one before so I have been playing with mine for the last hour or so, just seeing what I am getting as far as SWR and Impedance goes on my three SDR/scanner antennas. I finally got one of those NanoVNA's people have been talking about. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |